Halls Popular 86 Greenhouse

The Halls Popular 86 Greenhouse has been designed to protect your plans for years. This greenhouse features a strong aluminum frame, using a die cast zinc alloy ridge and gutter joints which ensure that the greenhouse is completely safe. The greenhouse comes complete with a roof vent and fully inclusive of integral gutters and smooth action sliding door to give you maximum movement. The Halls Popular Greenhouse range compliments any garden, and is fully functional.

Features:

·English-made quality aluminum frame carries a manufacturer's 15-year warranty, and will not corrode, rot, or rust

·The sliding door won't slam in the wind; doubles as an adjustable vent in warm weather

·The simple cushioned snap-in glazing system holds glazing panels securely in place, and allows for easy removal if needed

·The high-impact resistant 4mm twin wall polycarbonate panels are available on most models for increased safety and insulation value

·The panels are UV stabilized and carry a limited 10-year warranty

·Complete weather-stripping minimizes heat loss

·Large roof vents with adjustable openers allow for easy cooling

Item Specifications:

Dimensions:

8' L x 6' W x 6' H

Greenhouse Specifications:

Frame Material:

Aluminum or Polycarbonate

Color:

Green or Aluminum

Cover Material:

4mm Poly Carbonate

Weight:

110 Pounds

Tips on Installation:

Your greenhouse must be installed on a firm, strong base. The optional steel base is perfect, and includes anchor pegs which should be set in concrete (very important in windy areas). Or you may use a 4x6 (on edge) pressure-treated lumber base, or even a brick or poured concrete footing. Make sure the base is both level and square before continuing with the frame assembly to ensure the glazing panels will fit properly. Small gravel or stepping stones are recommended for flooring material.

If your kit comes with only one or two roof vents, installing them on the north side will prevent interference with the shade cloth, which will be installed on the south side. Installation of most models can usually be accomplished by 2 people in a week-end. Basic tool list for installation: level, 10mm nut driver or 3/8" ratchet with 10mm socket, 10mm or adjustable wrench, pocketknife, pliers, measuring tape, screwdrivers, gloves, stepladder.